It All HAS To Go... - Party Vibe

Welcome To

It All HAS To Go…

This topic is empty.

Viewing 15 posts - 1 through 15 (of 48 total)

1 2 3 4 →

Author

Posts
October 8, 2007 at 2:08 pm

#692990
1

Dan Ooops

@dan-ooops

Member
Guys

Final attempt now at selling my rig bits and bobs.

Thanks to all those who have bought stuff, and to all those who expressed an interest, here comes the final run down:

BASS:

I have two pairs of 18″ front loaded bass bins:

The bottom ones are 600w and the top ones are 400w.

All together 2K of bass. I have the missing strips for the edges, and a fresh grill for the one missing.

All four for £150…or £50 each:bounce_fl
October 8, 2007 at 2:21 pm

#892581
1

Dan Ooops

@dan-ooops

Member
Right

This is the big section…I have a couple of proper tops, in pairs:

Handmade full range cabs rated at 500W 4 ohm. These have eminence drivers and a bullet tweeter. They have passive crossovers in them. I also have the precut sheet material, along with corners/handles/clips/brackets to make a matching pair. You can have that free if you buy the first pair.

These are EV SH1810S mid/hi boxes. I like to run them as tops only, with the cabs above as mids in a three way set up, but they are equally good as mid/his. They have wheels, and are quite deep.

Back plate:

Again, these are £150 for all four!!!!

Or £50 each.
October 8, 2007 at 2:33 pm

#892582
1

Dan Ooops

@dan-ooops

Member
So – put all eight boxes together and you have a nice little three and a half K rig :crazy_dru perfect for parties/club nights/link ups/cafe bars/chill out rig etc.

All for the pricely sum of £300!!!

:laugh_at: Can’t really beat that I don’t think.

And if you take it all, I’ll throw in enough leads (signal and speaker) to make it all work, free!

Here’s what one stack might look like:

And here it is all lined up ready for loading (with a monitor for £20):
October 8, 2007 at 2:35 pm

#892596
1

Playground Politics

@playground-politics

Member
fookin bargain there, if i had the money and know how
October 8, 2007 at 4:24 pm

#892594
1

Ruff Beat Provider

@ruff-beat-provider

Member
Hello mate! Could you tell me what drivers the bins are loaded with because me and a mate have got a couple of your bins that are loaded with PD’s if this is the case then consider the bins pretty much sold!
Get back to me soon!

Cheers RBP
October 8, 2007 at 4:56 pm

#892595
1

Ruff Beat Provider

@ruff-beat-provider

Member
Also you got any amps around 1600watts that need to go?
October 8, 2007 at 6:44 pm

#892592
1

Raj

@raj

Member
Dan Ooops! wrote:

Guys

Final attempt now at selling my rig bits and bobs.

Thanks to all those who have bought stuff, and to all those who expressed an interest, here comes the final run down:

BASS:

I have two pairs of 18″ front loaded bass bins:
[ATTACH]2208[/ATTACH]

[ATTACH]2209[/ATTACH]

The bottom ones are 600w and the top ones are 400w.

All together 2K of bass. I have the missing strips for the edges, and a fresh grill for the one missing.

All four for £150…or £50 each:bounce_fl

what are the drivers you are using please?
October 9, 2007 at 7:50 am

#892583
1

Dan Ooops

@dan-ooops

Member
Ok, it seems that I forgot to explain a bit.

These bass bins have generic drivers in, and I have not had them apart for so long that I really cannot remember.
They certainly are not the PDs which Ruff n Tek have in their four (hence the difference in price)….

The mids are eminence drivers…

Any other queries, let me know.

Amps – I do have a couple available:

2 x PSL 1200W (600 each side at 8ohm I believe)
1 x C-Audio TR850 which needs a bit of work (last time I used it it had one side down) and is 850W at 4 ohms per side (one is going for £260 on ebay at the moment)
1 x Laney 600w (300W each side) – perfect for those EV tops

Prices for these are £150 for each PSL or £250 for the pair; £50 for the C-audio and £100 for the Laney.

Happy hunting:crazy_dru
November 11, 2007 at 8:38 pm

#892613
1

delirious

@delirious

Member
have you got a mobile / home number i could contact u on coz i’m very much interested in it all and were do u live?

:bounce_g:
November 12, 2007 at 11:24 am

#892609
1

john

@john

Member
Dan Ooops! wrote:

Guys

Final attempt now at selling my rig bits and bobs.

Thanks to all those who have bought stuff, and to all those who expressed an interest, here comes the final run down:

BASS:

I have two pairs of 18″ front loaded bass bins:

[ATTACH]2208[/ATTACH]

[ATTACH]2209[/ATTACH]

The bottom ones are 600w and the top ones are 400w.

All together 2K of bass. I have the missing strips for the edges, and a fresh grill for the one missing.

All four for £150…or £50 each:bounce_fl

im well interested in them ill have them of u strait away!!!!! were bouts u based?
November 12, 2007 at 11:25 am

#892584
1

Dan Ooops

@dan-ooops

Member
John

I live in South Oxon, near Wallingford if you know the area.

What specifically were you interested in??

Dan
November 12, 2007 at 6:13 pm

#892610
1

speakerboy

@speakerboy

Member
do you still have that laney amp? and does it run at 300watt per side at 4 or 8 ohm?
cheers mate
adi
November 13, 2007 at 8:48 am

#892585
1

Dan Ooops

@dan-ooops

Member
Hi

Pretty sure it runs a t 2×300 @ 8ohm

Haven’t used it for a while, and it resides at my mates house.

D
November 13, 2007 at 4:19 pm

#892611
1

speakerboy

@speakerboy

Member
ahh wicked that sounds pretty spot on!
still up for selling it then?
where are you based coz i live in north devon. so how much do you rekon dat would cost to post?

a
November 14, 2007 at 8:22 am

#892586
1

Dan Ooops

@dan-ooops

Member
Cor blimey!

I have no idea, but will look into it for you…..
Author

Posts

Viewing 15 posts - 1 through 15 (of 48 total)

1 2 3 4 →

You must be logged in to reply to this topic.