Thought I’d write a quick how-to on making herbal blends with synthetic cannabinoids. You will need:
Your choice of synthetic cannabinoid
Some sort of dried herb or leaf to place the cannabinoid on
Solvent, either isopropyl alcohol or acetone (I use acetone)
Some pots or pans (must not be plastic)
Spoon
plate
OK we’ll start with a few numbers that are good for beginners. 1 gram of cannabinoid should be placed onto 25 grams of leaf or whatever you’re using. For 1 gram cannabinoid and 25g herb you will want 100ml of acetone. Always weigh the cannabinoid properly, these are seriously potent compounds.
OK, once you have your cannabinoid weighed out, dissolve it in the acetone and place your herb into a pan or something similar. Once all the noid is dissolved pour the acetone over the herbs and give a good mix. It may not look like you have enough solvent but you don’t want the herb to be sat in a pool of solvent, it won’t harm it but it will increase the time it takes massively. Leave it for 10 mins then give another good stir then leave for about 1 hour.
Next step is to just lie the damp mix on a plate or something similar and leave to dry and that’s it.
Hope someone finds this useful and if you have questions, ask away.
